The electrical component comes in 8-VFSOP (0.091, 2.30mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 8. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 1.8V voltage supply. A total of 8 pins are injected into the electrical part body. These analog multiplexers are built based on SPDT switching circuits. The multiplexer consists of 1 circuits. If you are looking for variants of the digital switch, trying search with TS5A3154. In this multiplexer, the internal resistance is 900mOhm. Please refer to the datasheets for 8 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. A low voltage of 1.65V should be applied to the electronic component. 20nA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. It may damage the digital multiplexer if the voltage is higher than 100nA. Among the inputs that can be operated are the 1 inputs. There are 100MHz bandwidths for data transfer. There are 2 outputs on the analogue multiplexer.
TS5A3154DCURE4 Features
1 Channels Switch Circuit: SPDT 20nA Supply Current Bandwidth: 100MHz
TS5A3154DCURE4 Applications
There are a lot of Texas Instruments TS5A3154DCURE4 Analog Switches & Multiplexers ICs applications.
RGB switches
Access Concentrators
Digital access cross connects
Channel Banks
SONET/SDH ADM
Battery-powered systems
Video signal routing
Routers
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads