The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-6. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature extended to -40°C~85°C TA. 6 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. Into the electrical component body are injected 6 pins. A SPDT switching circuit is used to build these analog multiplexers. TS5A3157 can be used to search for analog multiplexer variants. A 10Ohm internal resistance characterizes this multiplexer. To find out what the 6 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 1.65V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 2.5μA. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 5μA. 300MHz-bandwidths can be used to transfer data between multiplexers. Don't miss this electronic component's additional features, such as: VIDEO APPLICATION. Resistivity from Drain to Source is 12Ohm for this electronic part. 2 outputs are included in the analogue multiplexer.
TS5A3157DBVR Features
1 Channels Switch Circuit: SPDT 2.5μA Supply Current Bandwidth: 300MHz Additional Features: VIDEO APPLICATION Drain-to-Source resistance: 12Ohm
TS5A3157DBVR Applications
There are a lot of Texas Instruments TS5A3157DBVR Analog Switches & Multiplexers ICs applications.