TS5A3157DCKRE4 Overview

Due to its 6-TSSOP, SC-88, SOT-363 packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 2:1. Operational temperature extended around -40°C~85°C TA. A total of 6 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. An electrical component of this type can be found in the 6 series. SPDT switching circuits are used in these analog switch ics. Try searching for the analog switch ic with TS5A3157 if you are looking for variants. It has an internal resistance of 10Ohm. Please refer to the datasheets for 6 pins functions. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 5.5V to a switch device. The digital multiplexer has a low cost Single supply. It is recommended that the electrical component receives a voltage of 1.65V. 2.5μA current would be enough for this multiplexer to operate. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. Putting voltage greater than 5μA on the multiplexer may cause damage. There are 1 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 300MHz bandwidths. Don't forget the additional features of this electronic part, such as: VIDEO APPLICATION. There are 2 outputs on the analogue multiplexer.

TS5A3157DCKRE4 Features

1 Channels
Switch Circuit: SPDT
2.5μA Supply Current
Bandwidth: 300MHz
Additional Features: VIDEO APPLICATION

TS5A3157DCKRE4 Applications

There are a lot of Texas Instruments TS5A3157DCKRE4 Analog Switches & Multiplexers ICs applications.

• Fiber In The Loop (FITL)
• Fault Tolerant Systems
• Frame Relay Equipment
• High reliability control systems
• SDH/SONET multiplexers
• Data Acquisition Systems
• Low-Voltage
• Automatic test equipment
• Data switching
• Multiplexers