DUAL Analog Switches BREAK-BEFORE-MAKE 6 Pins 1.8V SOT-70-6
SOT-23
TS5A3159DCKRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Package / Case
SOT-70-6
Number of Pins
6
Weight
2.494758mg
JESD-609 Code
e4
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
6
ECCN Code
EAR99
Resistance
1.1Ohm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Additional Feature
2-CHANNEL MUX/DEMUX
Subcategory
Multiplexer or Switches
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
1.8V
Pin Count
6
Temperature Grade
INDUSTRIAL
Number of Channels
1
Max Supply Voltage
5.5V
Min Supply Voltage
1.65V
Operating Supply Current
100nA
Max Supply Current
100nA
Throw Configuration
SPDT
Turn On Delay Time
20 ns
Supply Type
Single
Bandwidth
100MHz
Turn-Off Delay Time
15 ns
Off-state Isolation-Nom
63 dB
On-state Resistance Match-Nom
0.7Ohm
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
95ns
Switch-off Time-Max
70ns
Length
2mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
TS5A3159DCKRG4 Product Details
TS5A3159DCKRG4 Overview
As the electronic part is packed in SOT-70-6, international shipping is convenient. Total terminations are 6. The electronic part provides high-quality output because it has 1 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. The electrical component body receives 6 pins. An switch multiplexer with 1.1Ohm internal resistance has a value of 1.1Ohm. Datasheets for 6 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 1.65V. An operating current of 100nA would be sufficient for this switch device. When the digital multiplexer is charged above 100nA, damage can occur. There are 100MHz bandwidths for data transfer. Don't forget the additional features of this electronic part, such as: 2-CHANNEL MUX/DEMUX. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer.