DUAL Analog Switches MAKE-BEFORE-BREAK 6 Pins 1.8V SOT-23
SOT-23
TS5A3160DBVTE4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Package / Case
SOT-23
Number of Pins
6
Weight
6.492041mg
Packaging
Tape and Reel
JESD-609 Code
e4
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
6
Resistance
900mOhm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Subcategory
Multiplexer or Switches
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
1.8V
Terminal Pitch
0.95mm
Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED
Pin Count
6
Number of Outputs
2
Qualification Status
Not Qualified
Temperature Grade
INDUSTRIAL
Number of Channels
1
Max Supply Voltage
5.5V
Min Supply Voltage
1.65V
Operating Supply Current
10nA
Nominal Supply Current
10nA
Max Supply Current
50nA
Throw Configuration
SPDT
Turn On Delay Time
24 ns
Supply Type
Single
Bandwidth
100MHz
Turn-Off Delay Time
27 ns
Off-state Isolation-Nom
64 dB
On-state Resistance Match-Nom
0.15Ohm
Switching
MAKE-BEFORE-BREAK
Switch-off Time-Max
30ns
RoHS Status
RoHS Compliant
Lead Free
Lead Free
TS5A3160DBVTE4 Product Details
TS5A3160DBVTE4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOT-23. In order to provide high reliability, an advanced packaging method Tape and Reel is used. In total, there are 6 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. There are 6 pins injected into the electronic part body. It has an internal resistance of 900mOhm. The functions of 6 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Single supply type digital switch with a low cost. 1.65V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 10nA. A digital multiplexer may suffer damage if voltage is applied above 50nA. The transfer of data can be performed over 100MHz bandwidths. During operation, the multiplexer should not be exposed to a temperature above 85°C. The analog switch ics has 2 outputs.
TS5A3160DBVTE4 Features
1 Channels 10nA Supply Current Bandwidth: 100MHz
TS5A3160DBVTE4 Applications
There are a lot of Texas Instruments TS5A3160DBVTE4 Analog Switches & Multiplexers ICs applications.