As the electronic part is packed in 8-VFSOP (0.091, 2.30mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 3:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~85°C TA are extended for operation. Totally, there are 8 terminations. A high-quality output is provided by the electrical component's 3 channels. When the electronic component is given a voltage of 1.8V, it should be turned on and run. An electrical component like this is included in the 8 series. These analog multiplexers are built based on SP3T switching circuits. Search with TS5A3359 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 900mOhm. You can find the functions of the 8 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analog switch ics with Single supply type are cost-effective. 1.65V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 16nA. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. The analogue multiplexer may be damaged if voltage is greater than 50nA. The 1 inputs need to be operated in order to work. There are 100MHz bandwidths for data transfer. There are 3 outputs on the analogue multiplexer.