TS5A3359DCUTG4 Overview

The electronic component is convenient to ship overseas because it is packed in a 8-VFSOP (0.091, 2.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. 3:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 8. This electronic part offers high-quality output due to its 3 channels. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. This electrical component is included in the 8 series of products. A SP3T switching circuit is used for these analog switches. Using the TS5A3359 search parameter, you can discover variants of the switch. It has an internal resistance of 900mOhm. For details about the functions of 8 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 5.5V to a switch device. Single supply type digital switch with a low cost. 1.65V should be the lowest voltage fed to the electronic component. For this digital switch to work, 16nA current would suffice. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 50nA. The 1 inputs need to be operated in order to work. The transfer of data can be performed over 100MHz bandwidths. 3 outputs are included in the analogue multiplexer.

TS5A3359DCUTG4 Features

3 Channels
Switch Circuit: SP3T
16nA Supply Current
-3db Bandwidth: 75MHz
Bandwidth: 100MHz

TS5A3359DCUTG4 Applications

There are a lot of Texas Instruments TS5A3359DCUTG4 Analog Switches & Multiplexers ICs applications.

• Intelligent PBX
• High speed data transmission line cards
• Relay replacements
• MP3 players
• Ultrasound
• PBXs
• Low-Voltage
• Microprocessor controlled systems
• SONET/SDH ADM
• Medical Instrumentation