TS5A9411DCKRG4 Overview

The electrical component comes in SOT-70-6 packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape and Reel is used. In total, 6 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 2.5V, it should be turned on and run. Into the electrical component body are injected 6 pins. A 900mOhm internal resistance characterizes this multiplexer. The datasheets for the 6 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. A analog switch ic that has a cost-effective Single supply type. It is recommended to use 2.25V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 10nA current. A voltage higher than 500nA may cause damage to the switch multiplexer. It is possible to transfer data over a 100MHz-bandwidth. A temperature above 85°C is not suitable for operation of the analogue multiplexer. This digital multiplexer has 2 outputs.

TS5A9411DCKRG4 Features

1 Channels
10nA Supply Current
Bandwidth: 100MHz

TS5A9411DCKRG4 Applications

There are a lot of Texas Instruments
TS5A9411DCKRG4 Analog Switches & Multiplexers ICs applications.

• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)