TUSB6250PFC Overview

It's a good fit for the 80-TQFP package.It is packaged in a Tray case.The component is installed in the way indicated by Surface Mount.The component applied in USB 2.0 to ATA/ATAPI Bridgeis appropriate.An output voltage of 3V~3.6V volts can be provided by the device.On the basis of the [0], it is possible to find related parts.The number of terminations is 80.It is recommended that you set this device to 3.3V.There are a total of 80 pins on it.Operation is performed through the 80pins.The unit operates at a minimum working temperature of 0°Cin order to ensure reliable operation.When 70°Cis the maximum value, the part will run consistently.Electronic components from the family Bus Controllersare used.This interface IC operates at a voltage of 3.3V.In this device, there is BUS CONTROLLER, UNIVERSAL SERIAL BUS uPs/uCs/peripheral IC.Ideally, its output frequency should not exceed 24MHz.

TUSB6250PFC Features

It is based on TUSB6250.
Set the part at 3.3V volts
BUS CONTROLLER, UNIVERSAL SERIAL BUS of uPs/uCs/Peripheral ICs Type

TUSB6250PFC Applications

There are a lot of Texas Instruments TUSB6250PFC Specialized Interface ICs applications.

• Cellular phones
• Compatible with 65 V DACs and ADCs such as
• Ultrasound
• Short/Medium Loop: approximately 2000 ft. of 26 AWG,
• Precision test equipment
• E1 Multiplexer
• ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA
• PCMCIA cards
• Data Acquisition Systems
• Digital cross connects (DSX-1)