UC2525BDWTRG4 Overview

In the SOIC package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. There is a Tape & Reel (TR) solid enclosure around the pmic. It can switch at 400kHz. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 20V. There are 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 5.1V voltage based on test statistics. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. A frequency of 450kHz is set for the switching controller. You should keep dc regulator at -40°C degrees or higher. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. 1 functions (s) are included in the switch converters. Designing voltage regulators switchings with 16 pins. Switching can take place at a maximum frequency of 400kHz. It is possible to set the input voltage as 35V for nominal working statuses. This is an ideal solution for switching controllers with 100mA inputs. During normaloperations, it outputs a value of 18V. Voltage rating is 35V.

UC2525BDWTRG4 Features

Switching Frequency: 400kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz

UC2525BDWTRG4 Applications

There are a lot of Texas Instruments
UC2525BDWTRG4 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment