UC2823N Overview

Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. 1 outputs can be generated with the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. Voltages 8.4V~30V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with -25°C~85°C TA. Using this switching controller, it is possible to switch at 340kHz~460kHz. dc dc regulator is made easier with Through Hole. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Ramp, Soft Start which allows efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. DUAL are the position of the terminal of the switching converters. A variety of 16 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "UC2823". 16 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 13V. It should be noted that the dc to dc regulator only accepts 30V voltage as input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. Voltage regulator dc to dc is designed to operate at 80 % duty cycle during power-ups and power-downs to ensure reliability. A frequency of 1MHz is set for the switching controller. As a result, DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE so that the need can be met more directly. This voltage controller requires a supply voltage of 15V. It is important that the controller is supplied with 33mA more than 33mA volts of current.

UC2823N Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC2823N Applications

There are a lot of Texas Instruments UC2823N DC to DC converter applications.

• Hydraulic presses
• Fire elevators
• Precision electronic equipment
• Direct power supply system
• Industrial controllers
• Smart grid
• Scientific research
• Imported equipment
• Terrestrial set-top boxes
• Injection molding machinery