UC2825QG3 Overview

This switching controller fits most application requirements since it is packaged in a 20-LCC (J-Lead) package. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. 8.4V~30V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. There is a switch at 340kHz~460kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. Current Limit, Enable, Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . A variety of terminations with 20 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 15V. You can find other relevant dc to dc converter ics by searching "UC2825". There are only 20 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. dc dc voltage regulators should have a minimum input voltage of 8.8V. DC regulator outputs 13V voltage according to the test statistics. The dc to dc regulator can only accept a maximum input voltage of 30V. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. Switching controllers operate at 1MHz frequencies. The value of DC to DC voltage regulator is set to CAN ALSO BE CONFIGURED IN CURRENT MODE in order to better satisfy the requirement.

UC2825QG3 Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC2825QG3 Applications

There are a lot of Texas Instruments
UC2825QG3 DC to DC converter applications.

• Digital display device
• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment