UC2827DW-2 Overview

As a result of 24-SOIC (0.295, 7.50mm Width) compact design, the switching controller is compatible with most applications. 3 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 7.6V~20V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the 220kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control, Ramp, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 24. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. A search for "UC2827" will reveal other relevant dc to dc converter ics. 24 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 2.5V voltage. It's important to remember that the dc dc regulator's normaloutput current is 100mA, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 95 % to ensure reliability during power-up and power-down. Switching controller operates at 450kHz Hz. DC to DC voltage regulator has the value of CAN ALSO WORK IN CURRENT MODE to better satisfy the requirement. It is possible to set the input voltage as 15V for nominal working statuses. The supply voltage should be 15V.

UC2827DW-2 Features

Transistor Driver Outputs
Switching Frequency: 220kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 450kHz
CAN ALSO WORK IN CURRENT MODE

UC2827DW-2 Applications

There are a lot of Texas Instruments
UC2827DW-2 DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery