UC2827DW-2G4 Overview

It comes in the SOIC package, which makes switching controller suitable for most applications. It is sufficient to generate 3 outputs with this dc motor controller. The switching controller can be switched at 500kHz. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 24 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. In total, switching converter has 24 pins. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 95 %. 450kHz is the frequency of the switching controller. For better satisfaction, the value of DC to DC voltage regulator is CAN ALSO WORK IN CURRENT MODE. The temperature should be at least -40°C. DC regulator should run at a temperature 85°C higher than 85°C. As a whole, there are 1 function(s) in the switch converters. Designing voltage regulators switchings with 24 pins is one of the most important aspects of the process. It is possible for the controller to switch at a frequency of 500kHz. 15V is the nominal working voltage. A 100mA input switching controller would benefit from it. When it is working normally, it outputs a value of 2.5V. There must be a voltage supply of 15V volts. A maximum supply voltage of 20V is specified.

UC2827DW-2G4 Features

Switching Frequency: 500kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 450kHz
CAN ALSO WORK IN CURRENT MODE

UC2827DW-2G4 Applications

There are a lot of Texas Instruments
UC2827DW-2G4 DC to DC converter applications.

• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment