UC2834QTRG3 Description

The design of low input-output differential linear regulators is optimized for the UC1834 family of integrated circuits. High output current designs that use an external pass device are made possible by a high gain amplifier with outputs that can deliver 200mA as sink or source drives. Either polarity of regulator can be used with both positive and negative precision references. Currents in either the positive or negative supply lines can be detected and limited using a current sensing amplifier with a low, programmable threshold.

A fault monitoring circuit is also included in this set of components, and it can detect both under- and over-voltage fault situations. This circuitry outputs a fault alarm for either fault condition after a user-defined delay for transient rejection. A 100mA crowbar output is activated in the over-voltage condition. The crowbar output will be maintained by an over-voltage latch, which can be utilized to the driver outputs are turned off. One input that serves as both a supply reset and a remote shutdown terminal can accommodate system control for the device. These die have an inherent thermal shutdown function that protects them from excessive power dissipation.

UC2834QTRG3 Features

• Minimum VIN - VOUT Less Than 0.5V At 5A Load With External

• Pass Device

• Equally Usable For Either Positive or Negative Regulator Design

• Adjustable Low Threshold Current Sense Amplifier

• Under And Over-Voltage Fault Alert With Programmable Delay

• Over-Voltage Fault Latch With 100mA Crowbar Drive Output

UC2834QTRG3 Applications

• Power Management

• Consumer Electronics

• Portable Devices

• Industrial