UC2845AD8G4 Overview

With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs can be generated with the dc motor controller. An enclosure of Tube is used to package the PMIC. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 7.6V~30V. A -40°C~85°C TA dc switcher is not a problem. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . 8 terminations with a variety of function. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. UC2845 can be searched for other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Test statistics indicate DC regulator outputs 13.5V voltage. If you start a project, note down the dc dc regulator's usual output current of 200mA. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. A frequency of 500kHz is set for the switching controller. A nominal working status is achieved when the input voltage is set to 25V. Switching controller is necessary to provide a voltage of 11V. A controller's current should not exceed 25mA. 11mA current flow input could satisfy the switching converter for operation.

UC2845AD8G4 Features

Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz

UC2845AD8G4 Applications

There are a lot of Texas Instruments UC2845AD8G4 DC to DC converter applications.

• Hydro power
• Photovoltaic power
• Radio equipment
• Industrial controllers
• Medical equipment
• Energy management systems
• Computer rooms
• Product burn-in
• Hydraulic presses
• Plate bending machines