UC2856DWTRG4 Overview

With its 16-SOIC (0.295, 7.50mm Width) package, the switching controller fits the needs of most applications. The dc motor controller is adquate to generate for 2 outputs. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 7V~40V. Suitable for work in a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 200kHz . The Surface Mount allows it to be used for dc dc regulator in general. Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. A variety of 16 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "UC2856". Pins number 16 of switching converter in total. There is a particular type of Switching Regulator or Controllers in switching converter. The test statistics indicate that DC regulator outputs a voltage of 13.1V. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. Switching controller operates at 1MHz Hz. For nominal working status, the input voltage can be set as 40V. There is a requirement for a 15V supply voltage.

UC2856DWTRG4 Features

Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UC2856DWTRG4 Applications

There are a lot of Texas Instruments UC2856DWTRG4 DC to DC converter applications.

• Nuclear power plants
• Handheld GPS
• Grinders
• Smart grid
• Experimental setup
• Alternators
• Digital video recorders
• Digital precision reference circuits
• Production lines
• Linear guide