UC2903QTRG3 Overview

It is mounted through 20 terminals on the power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 4 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of 20-LCC (J-Lead) functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. There is a voltage supply of 15V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 4 voltages that have been checked. The power management is mounted by a Surface Mount-axis. There is a subcategory called Power Management Circuits for this power management. In total, it has 20 pins on IC management. Power managment ic pin count is 20. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 8V volts. The supply voltage (Vsup) should not exceed 40V volts in this IC power. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. Supplied with a operating current of 7mA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using UC2903, the base power ics number. To be able to work, this power management requires 15V volts of power.

UC2903QTRG3 Features

Multi-Voltage Supervisor type
Minimum supply voltage of 8V
7mA operating supply current

UC2903QTRG3 Applications

There are a lot of Texas Instruments UC2903QTRG3 Voltage Supervisors applications.

• DC stabilized power supply module
• emergency room
• Important electronics for automotive protection
• Medical-specific insulation monitor
• Telecommunications equipment
• Detection of phase loss
• Multi-voltage system
• Analog circuit
• Military electronics
• Electronics installed in the vehicle