UC2914DW Overview

This is included in the 18-SOIC (0.295, 7.50mm Width) package.At present, 1 channels are available.It's packaged in a Tube shape.Total terminations are 18.Device position DUAL is its terminal position.In total, there are 18 pins on it.A supply voltage of 12V can result in high efficiency.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller.For reliable operation, set the temperature to -40°C~85°C.Application General Purpose is available on the device.As you can see in UVLO, it's featured.The device should be able to be powered by a 5V~35VV power source.There are numbers in the UC2914 family that include it.18 pins are used in operation.There are Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault features that can be programmed.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is important that the supply voltage (Vsup) is kept above 5V for normal operation of the device.There is a supply current of 20mA.Hot Swap requires 20mA volts of current to operate.1.8V output voltage enables high efficiency.

UC2914DW Features

The terminal position of 18
Features of UVLO
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault
Output voltage of 1.8V

UC2914DW Applications

There are a lot of Texas Instruments
UC2914DW hot swap controllers applications.

• Avionics systems
• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies