UC3526AN Overview

With its 18-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. For outputs of 2, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 7V~35V and has a 7V~35V supply voltage. Worked in a 0°C~70°C TA dc switcher before. In this switching controller, the switch can be set to 1Hz~600kHz. The Through Hole allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Reset, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 18 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Searching "UC3526" will return other relevant dc to dc converter ics. 18 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 5V. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. Switching controllers work at 650kHz Hz. This value is LG-MAX so that DC to DC voltage regulator better serves the purpose. DC switching uses 14mA when it is dormant. A nominal working status is achieved when the input voltage is set to 15V.

UC3526AN Features

Transistor Driver Outputs
Switching Frequency: 1Hz~600kHz
Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 650kHz
LG-MAX

UC3526AN Applications

There are a lot of Texas Instruments
UC3526AN DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots