UC3526NG4 Overview
In the 18-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 8V~35V volts and has 8V~35V supply voltage. Suitable for working in an dc switcher that has a 0°C~70°C TA. It can switch at 1Hz~400kHz. As it has a Through Hole value, it can be used for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Reset, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 18 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. In addition to "UC3526", there are other relevant dc to dc converter ics you can find. There are 18 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 5.1V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 100mA. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. A frequency of 400kHz is set for the switching controller. It is possible to set the input voltage as 35V for nominal working statuses.
UC3526NG4 Features
Transistor Driver Outputs
Switching Frequency: 1Hz~400kHz
Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 400kHz
UC3526NG4 Applications
There are a lot of Texas Instruments
UC3526NG4 DC to DC converter applications.
- Network technology
-
- Automation technology
-
- CMM
-
- Various precision measuring instruments
-
- Various precision measuring detectors
-
- Flaw detection equipment
-
- Balance equipment
-
- Industrial robots
-
- Industrial controllers
-
- Die casting equipment
-
