UC3572DTR Overview

It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. There is a Tape & Reel (TR) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 4.75V~30V. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. The switching controller is capable of switching at the 100kHz position. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Current Limit, Ramp is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. There are many different types of terminations for 8. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. You can find other relevant dc to dc converter ics by searching "UC3572". In total, switching converter has 8 pins. Switching converter is a special type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4.75V. Statistically, the DC regulator outputs -70V voltage. If you start a project, note down the dc dc regulator's usual output current of 500mA. voltage regulator dc to dcs with a 92 % duty cycle are designed to be reliable when powered on and powered off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulator has a maximum frequency of 300kHz. Users should apply 30V to operate the voltage regulator dc to dc safely and reliably.

UC3572DTR Features

Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Ramp
PULSE WIDTH MODULATION
Max Duty Cycle: 92 %

UC3572DTR Applications

There are a lot of Texas Instruments UC3572DTR DC to DC converter applications.

• Flaw detection equipment
• Shearing machines
• Automatic plug-in machines
• Scientific research
• Electric heating, lighting
• Domestic water pumps
• Telecommunications equipment
• Pipe bending machines
• Industrial robots
• Computed tomography (CT)