UC3823ADW Overview

The switching controller fits in the 16-SOIC (0.295, 7.50mm Width) package and is ideal for most applications. The dc motor controller is adquate to generate for 1 outputs. Packaging for the pmic consists of Tube solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 8.4V~22V volts and has 8.4V~22V supply voltage. A 0°C~70°C TA dc switcher is not a problem. With this switching controller, you can switch at 400kHz~1MHz. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Frequency Control, Ramp, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. An array of 16 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. You can find other relevant dc to dc converter ics by searching "UC3823". There are a total of 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Based on the test statistics, DC regulator outputs voltage 2V. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. Switching controller operates at 1MHz Hz. The value of DC to DC voltage regulator is set at CAN ALSO BE CONFIGURED IN CURRENT MODE in order to fulfill the requirements more effectively. You can set the input voltage to 22V for nominal working status. A supply voltage of 15V is required.

UC3823ADW Features

Transistor Driver Outputs
Switching Frequency: 400kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC3823ADW Applications

There are a lot of Texas Instruments UC3823ADW DC to DC converter applications.

• Printing
• Cutting machine tools
• Radio equipment
• Overvoltage protection circuits in TV sets
• Geothermal power
• Hydraulic presses
• Gear/thread machining machines
• Special machining machine tools
• Low output voltage switching power supply circuits
• Magnetohydrodynamic power