UC3825ADW Overview

In the 16-SOIC (0.295, 7.50mm Width) package, the switching controller meets most application requirements. 2 outputs can be generated with the dc motor controller. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). A 8.4V~22V voltage is supplied to the dc control and used for operating it. Suitable for a 0°C~70°C TA dc switcher. This switching controller can switch at 400kHz~1MHz. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Frequency Control, Ramp, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. In addition to "UC3825", there are other relevant dc to dc converter ics you can find. There are only 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Statistically, DC regulator outputs 2V volts. If you are starting a new project, you should note the dc dc regulator's typical output current is 2A. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. Switching controllers operate at 1MHz frequencies. For better satisfaction, the value of DC to DC voltage regulator is CAN ALSO BE CONFIGURED IN CURRENT MODE. It is possible to set the input voltage to 22V for nominal working status. The supply voltage should be 12V. In order to ensure proper operation, the controller should not receive more current than 36mA.

UC3825ADW Features

Transistor Driver Outputs
Switching Frequency: 400kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC3825ADW Applications

There are a lot of Texas Instruments UC3825ADW DC to DC converter applications.

• Hydraulic presses
• Digital video recorders
• Current source circuits
• Correction machines
• Domestic water pumps
• Printing
• Surge protection circuits
• Radio equipment
• Direct power supply system
• Serial communication converter