UC3825ANG4 Overview

Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 2 input. A solid enclosure of Tube surrounds pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 8.4V~22V voltage are supplied and operated. Worked in a 0°C~70°C TA dc switcher before. There is a switch at 400kHz~1MHz that can be used with this controller. dc dc regulator can be generalized using Through Hole. Current Limit, Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 16. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 12V. You can find other relevant dc to dc converter ics by searching "UC3825". There are only 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 8.8V. Test statistics indicate DC regulator outputs 2V voltage. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. Switching controller operates at a frequency of 1MHz. DC to DC voltage regulator has the value of CAN ALSO BE CONFIGURED IN CURRENT MODE to better satisfy the requirement. There must be a voltage supply of 12V volts. Current supplied to the controller should not exceed 36mA.

UC3825ANG4 Features

Transistor Driver Outputs
Switching Frequency: 400kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC3825ANG4 Applications

There are a lot of Texas Instruments UC3825ANG4 DC to DC converter applications.

• Linear guide
• Wide-range voltage regulation circuits
• USB circuits
• Textile machinery
• Radio equipment
• CMM
• Network technology
• Household control circuits
• Digital display device
• Series voltage regulation circuits