UC3825DW Overview

As a result of 16-SOIC (0.295, 7.50mm Width) compact design, the switching controller is compatible with most applications. 2 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 8.4V~30V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. The switching controller is capable of switching at the 340kHz~460kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Ramp, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 16. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. A search for "UC3825" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Input voltage of dc dc voltage regulator must be 8.8V. Statistically, the DC regulator outputs 13V voltage. Voltages 30V are the maximum that the dc to dc regulator will accept. It's important to remember that the dc dc regulator's normaloutput current is 1.5A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 85 % to ensure reliability during power-up and power-down. Switching controller operates at 1MHz Hz. DC to DC voltage regulator has the value of CAN ALSO BE CONFIGURED IN CURRENT MODE to better satisfy the requirement. The supply voltage should be 15V. You should not supply more current than 33mA to the controller.

UC3825DW Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC3825DW Applications

There are a lot of Texas Instruments
UC3825DW DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery