UC3847DWTRG4 Overview

Capsuled in the 16-SOIC (0.295, 7.50mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 2 numbers. There is a Tape & Reel (TR) solid enclosure around the pmic. The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 6.95V~40V. Suitable for working in an dc switcher that has a 0°C~70°C TA. With this switching controller, you can switch at 500kHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. A variety of terminations with 16 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. Search for "UC3847" to find other relevant dc to dc converter ics. Total pins of switching converter are 16. Switching converter is a special type of Switching Regulator or Controllers. A 13.5V voltage of DC regulator was detected in the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 500mA, so you should note it down when starting a new project. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Switching controller operates at 450kHz Hz. 15V is the nominal working voltage.

UC3847DWTRG4 Features

Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz

UC3847DWTRG4 Applications

There are a lot of Texas Instruments UC3847DWTRG4 DC to DC converter applications.

• Emergency lighting monitoring equipment
• Linear guide
• Terrestrial set-top boxes
• Direct power supply system
• SMT equipment
• Digital display device
• Laboratories
• Cutting machine tools
• Experimental setup
• Balance equipment