UC3909DWG4 Overview

There is a package for Tube in which it can be found.We've included it in the 20-SOIC (0.295, 7.50mm Width) package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to 0°C~70°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of BATTERY CHARGE CONTROLLER must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number UC3909 can be found by following the order of the base part number.It contains a total of 20 terminations.It is equipped with 16 pins.It requires pins 20 to function.It should be able to run off a battery of 15V.In order for the device to operate properly, the supply voltage should not exceed 40V.In this case, the output current of the device is set to 2A.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A supply voltage of 7.5V is suitable for it, because it can operate with a low supply voltage.Vsup (maximum supply voltage) is set in the command to 19mA.The part's power supply is set to a value of 15V.Voltage input for the device is 15V.With 242kHz switching frequency, the part operates.In the course of operation, the maximum output current is reduced to 4.5mA.

UC3909DWG4 Features

Power Management Circuits subcategory
Switching frequency of 242kHz
20-SOIC (0.295, 7.50mm Width) package

UC3909DWG4 Applications

There are a lot of Texas Instruments
UC3909DWG4 Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift