UCC2541PWP Overview

In the 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 8.5V~35V. Suitable for working in an dc switcher that has a -40°C~105°C TA. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Enable, Ramp, Reset, Soft Start, Tracking which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. An array of 20 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. In addition to "UCC2541", there are other relevant dc to dc converter ics you can find. 20 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. As determined by the test statistics, the output voltage of DC regulator is 7.2V. The dc dc regulator's usual output current is 3A, which should be noted down when you start a project. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. The switching controller works at a frequency of 300kHz. For better satisfaction, the value of DC to DC voltage regulator is AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE. To operate the voltage regulator dc to dc safely and reliably, users should apply 35V. It is possible to set the input voltage to 35V for nominal working status. If there is 50mA current flow input, then the switching converter could operate.

UCC2541PWP Features

Transistor Driver Outputs
Enable, Ramp, Reset, Soft Start, Tracking
PULSE WIDTH MODULATION
Frequency: 300kHz
AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE

UCC2541PWP Applications

There are a lot of Texas Instruments UCC2541PWP DC to DC converter applications.

• Energy management systems
• Wide-range voltage regulation circuits
• Drilling machines
• Packaging
• Grinders
• Electric water heaters
• Machining centers
• CNC system
• Shearing machines
• Nuclear power plants