UCC2541PWPRG4 Overview

With its 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 8.5V~35V. Workable in an dc switcher where -40°C~105°C TA is the -40°C~105°C TArm. Using this switching controller, it is possible to switch at 300kHz. A generalization of dc dc regulator can be made using Surface Mount. Enable, Ramp, Reset, Soft Start, Tracking provides dcdc regulator efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 20 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Other relevant dc to dc converter ics can be found by searching "UCC2541". 20 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 8.5V. Statistically, DC regulator outputs 30V volts. You should note that the dc dc regulator's usual output current is 3A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulator1MHz has the maximum frequency. The value of DC to DC voltage regulator is set at AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE in order to fulfill the requirements more effectively. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 35V. There must be a voltage supply of 12V volts. It is not recommended to supply more current to the controller than 30mA.

UCC2541PWPRG4 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Ramp, Reset, Soft Start, Tracking
PULSE WIDTH MODULATION
AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE

UCC2541PWPRG4 Applications

There are a lot of Texas Instruments UCC2541PWPRG4 DC to DC converter applications.

• Plate bending machines
• Bending machines
• Smoke exhaust equipment
• Smoke prevention equipment
• Flaw detection equipment
• Analog precision reference circuits
• Refrigerators of central air conditioners
• Overvoltage protection circuits in TV sets
• Drilling machines
• Automatic plug-in machines