UCC25702N Overview

With its 14-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. dc motor controller is suitable for 1 output generation. There is a Tube solid enclosure around the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. 8.8V~15V is the supply voltage and the operating voltage of the dc control. A -40°C~85°C TA dc switcher is not a problem. With this switching controller, you can switch at 100kHz. dc dc regulator is made easier with Surface Mount. Current Limit, Frequency Control, Sequencing, Soft Start provides dcdc regulator efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. An array of 14 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 11V. Other relevant dc to dc converter ics will be returned if you search "UCC25702". In total, switching converter has 14 pins. The type is a particular Switching Regulator or Controllers of switching converter. 9.6V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 400mV voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 100mA, so you should note it down when starting a new project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. DC switcher's Through Hole qualifies it for most applications and prototypes. A frequency of 700kHz is set for the switching controller. In dormant mode, 750μA is used. A supply voltage of 11V is required. 20mA more than 20mA current should be supplied to the controller.

UCC25702N Features

Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 700kHz

UCC25702N Applications

There are a lot of Texas Instruments UCC25702N DC to DC converter applications.

• Digital video recorders
• Elevator lighting
• Thermal power
• Hydraulic presses
• Pipe bending machines
• Sink circuits
• Production lines
• Fire elevators
• Wide-range voltage regulation circuits
• Surge protection circuits