UCC25702PWTR Overview

In the 14-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 8.8V~15V volts and has 8.8V~15V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 100kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Frequency Control, Sequencing, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 14 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 11V. In addition to "UCC25702", there are other relevant dc to dc converter ics you can find. There are 14 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 9.6V. DC regulator outputs 400mV voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 100mA. Voltage regulator dc to dc is designed to operate at 99 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 700kHz is set for the switching controller. This voltage controller requires a supply voltage of 11V. It is important that the controller is supplied with 20mA more than 20mA volts of current.

UCC25702PWTR Features

Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99 %
Frequency: 700kHz

UCC25702PWTR Applications

There are a lot of Texas Instruments
UCC25702PWTR DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment