UCC2580DTR-1G4 Overview

As a result of SOIC compact design, the switching controller is compatible with most applications. 2 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The switching controller is capable of switching at the 430kHz position. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 16. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. 16 pins are present on switching converter. Input voltage of dc dc voltage regulator must be 10V. Voltages 14V are the maximum that the dc to dc regulator will accept. The maximum duty cycle of this voltage regulator dc to dc is set to 69 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at 1MHz Hz. A temperature -40°C lower than -40°C should be maintained. A temperature of 85°C more than 85°C degrees Celsius should be maintained in the undc regulator. In total, thare switch converters have 1 functions. A voltage regulators switching with 16 pins is designed. At maximum frequency, the controller can switch at 1MHz. Inputs of 100mA are ideal for this component. This algorithm outputs a value of 400mV in normaloperation. Voltage is rated 16V for maximum supply.

UCC2580DTR-1G4 Features

Switching Frequency: 430kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
Frequency: 1MHz

UCC2580DTR-1G4 Applications

There are a lot of Texas Instruments
UCC2580DTR-1G4 DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery