UCC2580DTR-3G4 Overview

It comes in the SOIC package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The switching controller can be switched at 430kHz. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. In total, switching converter has 16 pins. Switching converter type is specifically Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 10V. This dc to dc regulator accepts only 14V input voltage at most. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 69 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. 1MHz is the frequency of the switching controller. The temperature should be at least -40°C. DC regulator should run at a temperature 85°C higher than 85°C. As a whole, there are 1 function(s) in the switch converters. Designing voltage regulators switchings with 16 pins is one of the most important aspects of the process. It is possible for the controller to switch at a frequency of 1MHz. A 100mA input switching controller would benefit from it. When it is working normally, it outputs a value of 400mV. A maximum supply voltage of 16V is specified.

UCC2580DTR-3G4 Features

Switching Frequency: 430kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
Frequency: 1MHz

UCC2580DTR-3G4 Applications

There are a lot of Texas Instruments
UCC2580DTR-3G4 DC to DC converter applications.

• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment