UCC2580N-3 Overview

It comes in the 16-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8.5V~16V. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 400kHz. dc dc regulators can be carried out with Through Hole. Enable, Ramp, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. UCC2580 can be searched for other relevant dc to dc converter ics. In total, switching converter has 16 pins. Switching converter type is specifically Switching Regulator or Controllers. Statistically, DC regulator outputs 400mV volts. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 69 %. DC switcher's Through Hole qualifies it for most applications and prototypes. 1MHz is the frequency of the switching controller. Dormant dc switchings use 2.5mA.

UCC2580N-3 Features

Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
Frequency: 1MHz

UCC2580N-3 Applications

There are a lot of Texas Instruments
UCC2580N-3 DC to DC converter applications.

• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment