UCC27200DRG4 Overview

There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the packaging method.It's mounted on the way to Surface Mount.When the supply voltage is set to 8V~17V, it can demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.This device allows temperatures in the range of -40°C~140°C TJ.A type of Non-Inverting is used for input in this program.Mosfet driver is based on 8 terminations.There are various parts that can be found under its base part number UCC27200.Mosfet driver is mounted using Surface Mount.During design, it is configured with 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.As a maximum, there is 3A limit to the output current.There are various useful electronic components in its subcategory MOSFET Drivers.A total of 8 pins are available for component connections.Ideally, the high-side voltage should not exceed 120V.Based on its basis, it integrates 2 outputs.3A is the maximum output current supported by the device.Based on its maximum power dissipation of 1.3W, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 4mA to ensure greater stabilMosfet gate driversy.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V.The frequency of 1MHz can be adjusted in order to improve efficiency.

UCC27200DRG4 Features

Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 1.3W

UCC27200DRG4 Applications

There are a lot of Texas Instruments UCC27200DRG4 gate drivers applications.

• High-speed communications
• Motor controllers
• A/D drivers
• PCMCIA applications
• Video amplifiers
• Motor Control
• DC/DC converters
• Digitally controlled power supplies
• Line drivers
• High power buffers