UCC27201DDARG4 Overview

For greater flexibility, its SOIC package is used.Tape and Reel represents the package.Configuration is based on 2 drivers.Its configuration is based on a total of 8 terminations.Devices are mounted by Surface Mount.At the time of design, it is configured with 8 pins.In order to operate, a voltage of 12V has to be applied.Mosfet driver is equipped wMosfet driverh an interface chip HALF BRIDGE BASED PERIPHERAL DRIVER.Mosfet driver is possible to achieve a maximum output current of 3A.There are several useful electronic components in this subcategory of MOSFET Drivers.The board has 8 component pins.There is a maximum operating temperature of 140°C.Minimum operating temperatures are allowed to be -40°C.As a precaution, make sure the supply current is kept at 5.5mA.The maximum voltage for operation is 17V.A supply voltage of 8V is the minimum value required to operate the device.3A is the current that it outputs.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V.By using the frequency 1MHz, we can increase efficiency.

UCC27201DDARG4 Features

Embedded in the Tape and Reel package
2 drivers
8 pins

UCC27201DDARG4 Applications

There are a lot of Texas Instruments
UCC27201DDARG4 gate drivers applications.

• Portable computers
• High-speed communications
• RGB applications
• Broadcast equipment
• Active filtering
• Head-up and Head mounted displays
• High current laser/LED systems
• LCD/LCoS/DLP portable and embedded pico projectors
• Multicolor LED/laser displays
• Smart Phones