UCC2800MDREP Overview

With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 6.9V~12V and has a 6.9V~12V supply voltage. Worked in a -55°C~125°C TA dc switcher before. In this switching controller, the switch can be set to 46kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 8 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. Searching "UCC2800" will return other relevant dc to dc converter ics. 8 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator should be 7.5V. Based on the test statistics, DC regulator outputs voltage 5V. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 1MHz on this dc regulators. There is a requirement for a 10V supply voltage. It is not recommended to supply more current to the controller than 30mA. There is 500μA supply current for it. A dc controller's highest output voltage is measured at 5.075V.

UCC2800MDREP Features

Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %

UCC2800MDREP Applications

There are a lot of Texas Instruments
UCC2800MDREP DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots