UCC2800N Overview

As a result of 8-DIP (0.300, 7.62mm) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. There are Transistor Driver dc switching's output (s) that it can handle. 6.9V~12V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. It can switch at 46kHz. As it has a Through Hole value, it can be used for general dc dc regulator. Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 8 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. Other relevant dc to dc converter ics can be found by searching "UCC2800". There are a total of 8 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. 7.5V should be the minimum input voltage for the dc dc voltage regulator. Statistically, DC regulator outputs 1V volts. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. The switching controller works at a frequency of 1MHz. There must be a voltage supply of 10V volts. There should be 25mA more than 25mA amps of current supplied to the controller. There is 500μA nominal current supply for this the controllers dc.

UCC2800N Features

Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC2800N Applications

There are a lot of Texas Instruments UCC2800N DC to DC converter applications.

• Hydro power
• USB circuits
• Driver circuits
• Household control circuits
• Electric water heaters
• Wind power
• Medical equipment
• Imported equipment
• Hydrogen power
• Machining centers