UCC2803D Overview

This switching controller fits most application requirements since it is packaged in a 8-SOIC (0.154, 3.90mm Width) package. For 1 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 3.6V~12V. Suitable for working in an dc switcher that has a -40°C~85°C TA. In this switching controller, the switch can be set to 31kHz. dc dc regulator can be generalized using Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . The 8 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. You can find other relevant dc to dc converter ics by searching "UCC2803". The switching converter has a total of 8 pins. Switching converter type is specifically Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4V. Statistically, the DC regulator outputs 4.06V voltage. normally, the dc dc regulator's output current is 1A, which you should keep in mind when starting a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. A frequency of 1MHz is set for the switching controller. Switching controller is necessary to supply a voltage of 10V. You should not supply more current than 25mA to the controller. A current of 500μA is supplied to it. There is a nominal current supply of 500μA for this the controllers dc.

UCC2803D Features

Transistor Driver Outputs
Switching Frequency: 31kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC2803D Applications

There are a lot of Texas Instruments UCC2803D DC to DC converter applications.

• Hydrogen power
• Boring machines
• Computed tomography (CT)
• Surface processing equipment
• Digital precision reference circuits
• Imported equipment
• Medical equipment
• Alternators
• Direct power supply system
• Driver circuits