UCC2803DTR Overview

The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. dc motor controller is suitable for 1 output generation. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) are supported. dc controls with 3.6V~12V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. It can switch at 31kHz. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. An array of 8 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 10V. UCC2803 can be searched for other relevant dc to dc converter ics. There are 8 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. An input voltage of 4V is the minimum required for the dc dc voltage regulator. DC regulator outputs 1V voltage according to the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 1MHz is set for the switching controller. Switching controller is necessary to provide a voltage of 10V. It is important that the controller is supplied with 25mA more than 25mA volts of current.

UCC2803DTR Features

Transistor Driver Outputs
Switching Frequency: 31kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC2803DTR Applications

There are a lot of Texas Instruments UCC2803DTR DC to DC converter applications.

• Smoke prevention equipment
• Low output voltage switching power supply circuits
• Large fire protection systems
• Lathes
• Laboratories
• Motor controller circuits
• Electrical distribution systems
• Analog precision reference circuits
• Alternators
• Flaw detection equipment