UCC2805DTRG4 Overview

With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 3.6V~12V voltage are supplied and operated. Suitable for a -40°C~85°C TA dc switcher. There is a switch at 31kHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. Frequency Control provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. The 8 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 10V. Other relevant dc to dc converter ics can be found by searching "UCC2805". Total pins of switching converter are 8. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4V. DC regulator outputs 1V voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. The switching controller works at a frequency of 1MHz. This voltage controller requires a supply voltage of 10V. In order to ensure proper operation, the controller should not receive more current than 25mA.

UCC2805DTRG4 Features

Transistor Driver Outputs
Switching Frequency: 31kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC2805DTRG4 Applications

There are a lot of Texas Instruments UCC2805DTRG4 DC to DC converter applications.

• Emergency lighting monitoring equipment
• Household control circuits
• Large fire protection systems
• Automatic testing equipment
• Series voltage regulation circuits
• Electrical power transmission
• Packaging
• Computer-related products
• USB circuits
• Geothermal power