UCC2805N Overview

Capsuled in the 8-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. 1 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 3.6V~12V volts and has 3.6V~12V supply voltage. Worked in a -40°C~85°C TA dc switcher before. With this switching controller, you can switch at 31kHz. dc dc regulators can be carried out with Through Hole. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 10V. You can find other relevant dc to dc converter ics by searching "UCC2805". Switching converter has a total of 8 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. Statistically, DC regulator outputs 1V volts. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. In most applications and prototype designs, DC switcher is qualified as a Through Hole. Switching controller operates at 1MHz Hz. The maximum input voltage of dc switcher is 12V, so users should limit their voltage accordingly. Voltage 10V must be supplied. Output current will not exceed 1A. It is important that the controller is supplied with 25mA more than 25mA volts of current. nominal current supply for this the controllers dc is 500μA. An input of 500μA current flow could satisfy the operation of the switching converter .

UCC2805N Features

Transistor Driver Outputs
Switching Frequency: 31kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC2805N Applications

There are a lot of Texas Instruments UCC2805N DC to DC converter applications.

• Window air conditioners
• Handheld GPS
• Adjustable voltage or current linear circuits
• Post equipment
• Electric water heaters
• Automatic plug-in machines
• Various precision measuring instruments
• Current source circuits
• Scientific testing
• Scientific research