UCC2806MTR Overview

This switching controller fits most application requirements since it is packaged in a 16-SSOP (0.154, 3.90mm Width) package. 2 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. A 8V~14.5V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~85°C TA dc switcher before. This switching controller can switch at 47kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . 16 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. Search for "UCC2806" to find other relevant dc to dc converter ics. Pins number 16 of switching converter in total. The type is a particular Switching Regulator or Controllers of switching converter. A 11.9V voltage of DC regulator was detected in the test statistics. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controller operates at 1MHz Hz. Input voltage can be set to 14.5V for nominal working status.

UCC2806MTR Features

Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC2806MTR Applications

There are a lot of Texas Instruments UCC2806MTR DC to DC converter applications.

• Low output voltage switching power supply circuits
• Scientific testing
• Automation technology
• Balance equipment
• Injection molding machinery
• ATMs
• Radio equipment
• Computer monitoring equipment of building
• Electric heating, lighting
• Smoke prevention equipment