UCC2807D-1 Overview

As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. It is sufficient to generate 1 outputs with this dc motor controller. A solid enclosure of Tube surrounds pmic. There are Transistor Driver dc switching's output (s) that it can handle. 6.9V~13.5V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to 202kHz. The Surface Mount allows it to be used for dc dc regulator in general. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. switching converters terminal (s) are designed to be at DUAL. 8 terminations with various dc switching's functions. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis 10V volts. You can find other relevant dc to dc converter ics by searching "UCC2807". Switching converter has a total of 8 pins. The type is a particular Switching Regulator or Controllers of switching converter. The minimum input voltage of the dc dc voltage regulator should be 7.5V. According to the test statistics, DC regulator outputs 400mV voltage. It's important to remember that the dc dc regulator's normaloutput current is 100mA, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 81 % to ensure reliability during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controller operates at a frequency of 1MHz. There must be a voltage supply of 10V volts.

UCC2807D-1 Features

Transistor Driver Outputs
Switching Frequency: 202kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 81 %
Frequency: 1MHz

UCC2807D-1 Applications

There are a lot of Texas Instruments UCC2807D-1 DC to DC converter applications.

• Remotely powered electric motors
• Various precision measuring instruments
• Large fire protection systems
• Flaw detection equipment
• Arc suppression circuits
• Printing
• Computed tomography (CT)
• seismic instrument power circuits
• Low output voltage switching power supply circuits
• Industrial robots