UCC2808AQDR-2Q1 Overview

Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 2. The pmic is packaged in Cut Tape (CT) solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. A 4.1V~15V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~125°C TJ dc switcher. Switching can be done at 194kHz with this switching controller. As it has a Surface Mount value, it can be used for general dc dc regulator. Frequency Control provides dcdc regulator efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. switching converters terminal (s) are designed to be at DUAL. An array of 8 terminations of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. Other relevant dc to dc converter ics can be found by searching "UCC2808". Pins number 8 of switching converter in total. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.3V. DC regulator outputs 500mV voltage according to the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. 1MHz is the frequency of the switching controller. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator. There is 1mA nominal current supply for this the controllers dc.

UCC2808AQDR-2Q1 Features

Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC2808AQDR-2Q1 Applications

There are a lot of Texas Instruments UCC2808AQDR-2Q1 DC to DC converter applications.

• Television equipment
• Flexible manufacturing cells
• Remotely powered electric motors
• Access control systems
• Correction machines
• Lathes
• Electric heating, lighting
• Surface processing equipment
• Computer-related products
• Analog precision reference circuits