UCC2808DTR-2G4 Overview

It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 2. Tape & Reel (TR) solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.1V~15V voltage are supplied and operated. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller can be switched at 194kHz. dc dc regulator can be generalized using Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 8 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 10V. You can find other relevant dc to dc converter ics by searching "UCC2808". There are only 8 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.3V. As determined by the test statistics, the output voltage of DC regulator is 500mV. You should note down the dc dc regulator's usual output current of 500mA when you start a project. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is 1MHz frequency setting on the switching controller. A supply voltage of 10V is required.

UCC2808DTR-2G4 Features

Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC2808DTR-2G4 Applications

There are a lot of Texas Instruments UCC2808DTR-2G4 DC to DC converter applications.

• Hydro power
• Constant current circuits
• Experimental setup
• Imported equipment
• Machining centers
• Planers
• Ball screw pair
• Smart grid
• Electric water heaters
• Digital precision reference circuits