UCC2808N-2 Overview

In the 8-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.1V~15V volts and has 4.1V~15V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 194kHz. As it has a Through Hole value, it can be used for general dc dc regulator. To provide efficient switching control, Frequency Control is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. In addition to "UCC2808", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.3V. DC regulator outputs 500mV voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 500mA. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. A frequency of 1MHz is set for the switching controller. This voltage controller requires a supply voltage of 10V. There is a nominal current supply of 1mA for this the controllers dc.

UCC2808N-2 Features

Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC2808N-2 Applications

There are a lot of Texas Instruments
UCC2808N-2 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment