UCC2813N-0 Overview

It comes in the 8-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 6.9V~12V volts and has 6.9V~12V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. The Through Hole allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 8 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. You can find other relevant dc to dc converter ics by searching "UCC2813". There are only 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 7.5V. DC regulator outputs 1V voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. The switching controller works at a frequency of 1MHz. There must be a voltage supply of 10V volts. There should be 30mA current exceeding 30mA supplied to the controller. Switching voltage regulators' nominal current supply is 500μA. This controller performs best at a frequency of 1MHz.

UCC2813N-0 Features

Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
Switching Frequency: 1MHz

UCC2813N-0 Applications

There are a lot of Texas Instruments UCC2813N-0 DC to DC converter applications.

• Computer-related products
• Motor controller circuits
• Access control systems
• Low output voltage switching power supply circuits
• Cutting machine tools
• Post equipment
• Die casting equipment
• Automatic plug-in machines
• Remotely powered electric motors
• Industrial robots