Currently, it is available as a TSSOP package.As well as the POWER FACTOR CONTROLLER integrated circuit, this part contains other types of integrated circuits as well.The gadget has a number of 16 terminals on the back of it.This component retains the pin number at 16 even though the pin number has been changed.There is a switching frequency of 115kHz which is the frequency of switching.There are 16 pins in this board, which make up its sum.I guess you could say it's a subclass of Switching Regulator or Controllers in a way.As long as the frequency is kept constant at 250kHz, it is possible to continue to operate with good accuracy.As a result, it works in a 1.2A output current at the maximumPower for the component is always provided by a 12V volt supply.If you want to stop the power supply current from exceeding 6mA, the maximum supply current shall be Isup.It is supplied by 12V supplies that make up this device.A temperature of -40°C should be higher than the temperature of W when it is operating.In this case, the maximum operating temperature is 85°C at this point.You can only use it with a voltage supply of 17V volts.For the 10.8V-volt supply voltage, there is only one that will work for it: that is, 10.8V volts will work.
UCC2819APWG4 Features
UCC2819APWG4 Applications
There are a lot of Texas Instruments UCC2819APWG4 PFC PMICs applications.
